Termékek k k odorelem (9)

El adsorbente Nedex 'Zeolan-K' es una mezcla de zeolitas sintéticas 3A y aglutinantes naturales. Los productos están diseñados para un proceso de adsorción de agua estática con una velocidad de adsorción muy baja. Con una densidad optimizada pueden alcanzar muy buena capacidad de adsorción de agua en un volumen específico. No tienen reacciones químicas con el aluminio, el acero, el acero galvanizado y los plásticos. ZEOLAN-K es un adsorbente para unidades de vidrio aislante con especificaciones según EN 1279:2018. Características: Valores de desorción de gas muy bajos. Alta capacidad de adsorción de agua. Granulación sin partículas rotas y Bajos valores electrostáticos y cero contenido de polvo.

Distal-M Release agent based on selected organic compounds, promoting removal and anti-corrosive agents, ready-to-use, specific for metal moulds. Distak-M should be used undiluted, sprayed directly on the surfaces to be treated. Distak-M performs a physico-chemical action: the product, properly applied, forms an extremely thin separating film between the formwork and the fresh concrete, allowing easy detachment and the resulting surfaces are free from stains and soiling. Distak-M is suitable for "stripping" metal moulds, both in traditional buildings and in prefabrication with normal and/or steam curing. The chemical activity, connected with the reaction, at superficial level with the alkalis of the fresh concrete, which allows the elimination of the barrier effect, leaves surfaces without removal problems for subsequent coatings and painting. It facilitates formwork removal, without greasing or staining the workpiece. It prevents cracking and bubbles on the final surfaces of the product. After formwork removal, it can be painted or treated with another type of finish. It protects the formwork from rust. It can be used as a protective agent on truck mixers or equipment, to reduce internal and external concrete incrustations. Release treatments for concrete castings in metal moulds with normal and accelerated curing. Distak-M is a ready-to-use product that must be applied as a spray. With one litre of Distak-M, correctly applied, the indicative yield is about 30-50 m², depending on the quality of the formwork. Any excess product must be removed; any overdosage may compromise the stripping or the success of the superficial appearance of the casting. With 1 litre of Distak-M, correctly applied, it is possible to consider an indicative yield of approximately 30-50 m², according to the quality of the formwork. Packaging: 25-liter can UM: €/l

Cortec VpCI® 368 and VpCI-377: Shield Your Metal. Cortec VpCI® 368 Extreme Outdoor Corrosion Inhibitor and Cortec VpCI-377 are both potent anti-corrosion products from Cortec.While sharing the VpCI technology core, they diverge in application and strength. VpCI® 368 is a solvent-based, heavy-duty shield for equipment braving harsh outdoor conditions.Its aggressive formula, packed with amine carboxylates, penetrates deep, offering up to 24 months of protection against humidity, salt, and chemicals.Ideal for exposed machinery and structures. VpCI-377 is a water-based, versatile protector suitable for indoor and outdoor use.Its blend of organic and inorganic inhibitors provides reliable defence for tools, equipment, and metal components in warehouses, shipping containers, and milder environments.Offers up to 12 months protection. VpCI® 368 excels in extreme conditions due to its deeper penetration and robust formula.VpCI-377 shines in versatility and environmental friendliness.

Lubrication of chains, hinges, joints, ejector pins, clamping and drying frames or slideways at temperatures up to 250°C or under influence of water, for example conveying systems in painting, stoving, drying and cooling bed installations Advantages and benefits Outstanding oxidation properties Resistant to water and steam Good creep properties Outstanding adhesion and lubrication effect with no tendency to drip No formation of hard residues Extreme wear protection through Moₓ-Active Resistant to ultraviolet radiation Operating temperature:-10 °C → +250 °C Density (20 °C):0.91 g/ml Viscosity (40 °C):4,000 mm²/s Four-ball test rig (welding load):2,200 N

Air Liquide liefert Argon. Sie wünschen eine persönliche Beratung? Wir sind für Sie da! Einfach das Kontaktformular ausfüllen. Einer unserer Experten wird sich in Kürze bei Ihnen melden.

Motoröle können durch unterschiedliche Stoffe, einschließlich Verbrennungsrückstände, während des langfristigen Einsatzes verschmutzt werden. Eine regelmäßige Überprüfung des Ölzustandes ist deshalb wichtig, um Trends im Ölqualität zu überwachen und Information über Unregelmäßigkeiten in Motorölen zu erhalten. Zur Erkennung der Rußverschmutzung im Schmieröl und zur Bestimmung des Grades der Verschmutzung kann ein einfacher und schneller Test „Tüpfelproben Check“ direkt vor Ort durchgeführt werden. Der Test ist nicht als Ersatz der Labor-Ölanalyse gedacht, sondern ermöglicht es, durch Vergleich der Tüpfelproben über einen langen Zeitraum das entsprechende Niveau der Ölverschmutzung nachzuvollziehen.

NEDEX adsorbent ‘NANOMOL’ is a mixture of calcium oxide containing natural desiccants and natural binders. The product is designed for a static water adsorption process with very low adsorption speed. With an optimized density it can reach very good water adsorption capacity in a specific volume. It has no chemical reactions to aluminium, steel, galvanized steel and plastics. NANOMOL has even higher water adsorption capacity and Delta T compared to MULTIMOL. NANOMOL is an adsorbent for insulating glass units with specifications according to EN 1279:2018. Features: Very low gas desorption values Very high water adsorption capacity Granulation without broken particles and Zero dust content

Cortec VpCI® 322 is a concentrated, solvent-based oil safeguarding ferrous and non-ferrous metals from corrosion. Leveraging advanced VpCI® technology, it forms a thin, transparent film that protects against rust, even in hard-to-reach areas.This oil not only inhibits corrosion but also lubricates moving parts due to added anti-wear agents.Its low viscosity ensures easy application and penetration.Ideal for equipment, parts, and components during shipping, storage, or lay-up, VpCI® 322 safeguards a wide range of metals, including carbon steel, stainless steel, copper, brass, aluminium, and galvanised steel.

VPCI 322 is een op olie gebaseerde, geconcentreerde corrosiebeschermingsoplossing. Cortec VPCI 322 presteert zowel binnen als buiten goed. Cortec VPCI-technologie wordt in deze formule gebruikt. Ze vormen een dunne, robuuste, enkellaagse film die zich hecht aan metalen oppervlakken en uitstekende contactcorrosie- en roestbescherming biedt. Dampfase-corrosieremmers (VPCI) worden gebruikt in de 322-formule. Dit biedt bescherming naast het fysieke barrière van de film zelf. Het VPCI-molecuul verdampt in wezen in de lucht boven de corrosieremmende olie. Deze VPCI-moleculen 'hechten' aan metalen oppervlakken en kunnen langdurige roestbescherming bieden. VPCI 322 kernpunten Biedt 'multi-metal' roestbescherming voor zowel ferro als non-ferro metalen Zonder barium, chromaten, fosfaatremmers en nitraat Hoog vlampunt Hoge thermische stabiliteitsformule. Contactcorrosie op lange termijn met Vapor Phase-technologie Gaat gemakkelijk door een filter van 5 micron